5V Crimp
GENERAL PANEL INFORMATION
| Application: | Residential, Commercial, Industrial, and Agricultural panels. |
| Coverage: | 24" panel coverage with a 1/2" seam height. |
| Minimum Slope: | Recommended slope 2/12 or greater. |
| Substrate: | Recommended substrate 1/2" - 5/8” plywood with a 30 lb. felt moisture barrier. |
| Length: | Panels are continuous lengths from eave to ridge. |
| Fastening System: | Exposed fastening system. Recommended that panels are fastened to substrate at center rib and on inside rib of side lap, with a maximum fastener spacing of 16" o/c. |
| Fasteners: |
1 1/2" self-sealing neoprene washer screws. |
| Materials: |
Panels are fabricated from 26 gauge or 24 gauge Galvalume*. |
| Coatings & Finishes: |
26 gauge pre-painted Galvalume* panels are available in over 10
standard colors. |
| Warranty: | 20, 25, and 35 year manufacturer warranties available. |
| Approvals & Testing: | Florida Building
Code and Miami-Dade HVHZ product approvals. TAS 125 (UL-580 uplift resistance test). TAS 100-95 (wind driven rain test). Class A Fire Rating (UL-790). |
ADDITIONAL PANEL INFORMATION
|
|
* Galvalume sheet uses an aluminum (55%) - zinc (45%)
alloy coating that offers greater corrosive resistance, higher temperature
oxidation resistance, and higher heat reflectivity than standard galvanized steel. |
|
† Kynar 500 is a premium fluorocarbon coating, produced
with full strength Kynar 500 resin. This affords maximum exterior durability due
to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available. |
26 gauge
Galvalume Color Chart
24 gauge Galvalume Color Chart
*
5V Crimp
Panel Specifications
*
5V Crimp 3 Part
Specifications