AGG-Panel
GENERAL PANEL INFORMATION
| Application: | Residential, Commercial and Architectural panels. |
| Coverage: | 36" panel width, with a 3/4" seam height. |
| Minimum Slope: | Recommended slope 3/12 or greater. |
| Substrate: | Recommended substrate 1/2" - 5/8” plywood with a 30 lb. felt moisture barrier. |
| Length: | Panels are continuous lengths from eave to ridge. |
| Fastening System: | Recommended that panels are fastened to substrate according to manufacturer specifications. Recommended spacing 16" o/c. |
| Fasteners: |
1 1/2" self-sealing neoprene washer screws. |
| Materials: |
Panels are fabricated from 26 gauge or 24 gauge mill finish or pre-painted Galvalume*. |
| Coatings: |
26 gauge pre-painted Galvalume* panels are coated with a baked-on
Akzo Nobel Ceram-A-Star 950 paint finish. |
| Warranty: | 25 year
manufacturer warranty for 26 gauge pre-painted Galvalume* panels. 35 year manufacturer warranty for 24 gauge pre-painted Galvalume* panels. |
ADDITIONAL PANEL INFORMATION
|
|
* Galvalume sheet uses an aluminum (55%) - zinc (45%)
alloy coating that offers greater corrosive resistance, higher temperature
oxidation resistance, and higher heat reflectivity than standard galvanized steel. |
|
† Kynar 500 is a premium fluorocarbon coating, produced
with full strength Kynar 500 resin. This affords maximum exterior durability due
to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available. |