R-Panel
| Application | Residential, Commercial, Industrial, and Agricultural panels | |
| Coverage |
36” panel coverage, with a 1-1/4” seam height. |
|
| Minimum Slope | Recommended slope 2/12 or greater | |
| Substrate |
Non-Structural:
1/2”-5/8” plywood with a 30 lb. felt moisture |
|
| Length | Panels are continuous lengths from eave to ridge | |
| Fastening System |
Exposed fastening system. Recommended that panels are fastened to substrate according to manufacturer specifications.
Non-Structural
(maximum): Field
16” o/c / Eaves 6” o/c / Gable ends 8” o/c. |
|
| Fasteners |
Self-sealing neoprene washer screws (refer to manufacturer’s specifications). |
|
| Materials |
Panels are fabricated from 26 gauge or 24 gauge Galvalume* Also available in Aluminum and Copper. |
|
| Coatings & Finishes |
-26
gauge pre-painted Galvalume* panels are available in over
10 standard
colors. |
|
| Warranty | 25, and 35 year manufacturer warranties available | |
| Approvals & Testing |
-
Florida Building Code and Miami-Dade HVHZ product approvals |
* Galvalume sheet uses an aluminum (55%) - zinc (45%) alloy coating that offers greater corrosive resistance, higher temperature oxidation resistance, and higher heat reflectivity than standard galvanized steel.
† Kynar 500 is a premium fluorocarbon coating, produced with full strength Kynar 500 resin. This affords maximum exterior durability due to its outstanding resistance to ultraviolet radiation. These are the highest quality finishes available.
