Ridge Anchor
|
Patent Pending |
|
Florida
HVHZ |
General Information
Application: Metal component designed to mechanically fasten the hip/ridge cap on tile roof systems.
Product Approval: Florida HVHZ product approval with adhesive and mechanical attachment options.
Materials: Fabricated from 26 gauge mill finish Galvalume.*
Length: Manufactured in 10’ lengths.
Height: Available in 5 standard sizes of 4", 5", 6", 7" or 8" for various tile profiles.
Fasteners: 1 1/2" self-sealing neoprene washer screws spaced 16" o/c. Approved roof nails spaced 6" o/c.
Additional Information
-
Designed to divert water.
-
Fabricated from Galvalume* for corrosion resistance.
-
Beveled top edge to form to standard hip/ridge tile.
-
Easier and faster to install than traditional lumber and strapping.
*Galvalume sheet uses an aluminum (55%) - zinc (45%)
alloy coating that offers greater corrosive resistance, higher temperature
oxidation resistance, and higher heat reflectivity than standard galvanized
steel.
D.C.S.M. Ridge Anchor
Please click on any of the links below for printable
specification and installation guidelines
Ridge Anchor Specifications
Ridge Anchor Recommended Height Options
Installation Guidelines:
RT600 & Fastener